XTC-3D® High Performance 3D Print Coating
XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. It does not melt plastic. Two liquids are mixed together and brushed onto any 3D print. The coating self-levels and wets out uniformly without leaving brush strokes. It has a working time of 10 minutes and a cure time of about four hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colours and metal effects is easy.
XTC-3D is inexpensive - 1 oz. covers 100+ square inches and has a 90 % time & labour savings. XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish because of this the need to post finish is almost eliminated.
XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
XTC-3D® does not contain VOC's, phthalates or phosphates.
|Product Name||Pot Life||Demould Time||Net Weight|
|XTC-3D (24 oz. Unit)||10 minutes||4 hours||0.6 Kg|
|XTC-3D (6.4 oz. Unit)||10 minutes||4 hours||181 gms|