TASK™ 7

  • Flame Resistant Urethane Resin

Flame Out™ is a low viscosity, fast set casting resin that meets UL 94 V-O requirements for flame resistance. It does not contain mercury, TDI or MOCA. Mix ratio is 1A:1B by volume. Pot life is 2.5 min. and demould time is 10 min. at 73°F / 23°C (depending on mass).

TASK™  7 - Flame Resistant Urethane Resin

Quick Tech Data

  • 1A:1B

    Mix Ratio By Volume

  • 104A:100B

    Mix Ratio By Weight

  • 2.5 minutes

    Pot Life

  • 10 minutes

    Cure Time

  • 73 D

    Shore Hardness

  • White

    Colour

How Does It Work?
Watch 1-Minute Video

Fully cured Flame Out™ material is tough, durable, machinable and paintable. It has much higher physical and performance properties than any other flame rated urethane available anywhere. Vibrant colors and colour effects are possible by adding SO-Strong™ colour tints. Applications for Flame Out™ include making flame resistant prototype and architectural models, model toys, theme park and stage elements, durable miniatures and special effect props. Material can also be used for potting and encapsulation applications.

TASK™  7 - Flame Resistant Urethane Resin

Videos

Casting TASK®7 Flame Out® Fire Resistant Urethane Resin

Available Sizes

  • Trial Kit
    £29.90
    *Vat Included
  • Net Wt: 1.02 kg
    QTY
  • Gallon Kit
    £198.68
    *Vat Included
  • Net Wt: 8.34 kg
    QTY

Product Questions

Total 1 question(s) page: 1

How can I eliminate bubbles from my castings?

Question submitted by: username | on: date time

Using a vacuum chamber or pressure pot will help in removing most to all bubbles from your castings. You can read more here.

Answer submitted by: username | on: date time

Have a Question?

  • Keep my question private