Solaris Bonding Primer

  • Pint

For use with Solaris® solar panel encapsulating silicone for maximum adhesion to glass.

Glass surface preparation:

Step 1 – Wipe glass surfaces using Isopropyl Alcohol applied with lint-free paper towels. Let dry for 10 minutes.

Step 2 – Wipe the glass surfaces with ammonia-based glass cleaner applied with lint-free paper towels. Let dry for 10 minutes.

Note: Do not touch glass surface after cleaning.

Solaris Bonding Primer - Pint

When glass surface is clean, apply one coat of Solaris® Bonding Primer® using a clean, dry paint brush and let dry for 10 minutes. A hazy film will form on the glass surface. Wipe away film using a lint-free cloth until surface is clear. Apply a second coat of Solaris® Bonding Primer®, let dry for 10 minutes and wipe surface until clear. You are now ready to apply the Solaris® Silicone Encapsulant to the prepared glass surface.

Please contact us for available sizes and pricing.

London | tel: +44(0) 208 751 6521

Kidderminster | tel: +44(0) 1562 515121

Product Questions

Total 1 question(s) page: 1

How can I eliminate bubbles from my castings?

Question submitted by: username | on: date time

Using a vacuum chamber or pressure pot will help in removing most to all bubbles from your castings. You can read more here.

Answer submitted by: username | on: date time

Have a Question?

  • Keep my question private