Mold Star™ 15 SLOW
1A:1B By Volume Silicone Rubber
Mold Star™ silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Moulds made with Mold Star™ will last a long time in your mould library and are good for casting wax, gypsum, resins and other materials.
![Mold Star™ 15 SLOW - 1A:1B By Volume Silicone Rubber](https://www.benam.co.uk/pub/media/catalog/product/m/o/moldstar15-combo-533x400.jpg?width=533&height=400&store=bam_view&image-type=image)
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
50 minutes
Pot Life
-
4 hours
Cure Time
-
15 A
Shore Hardness
Cured Mold Star™ rubber is heat resistant up to 232°C (450°F) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star™ rubbers are not intended for brush-on mouldmaking.
Note: This product will not cure against surfaces containing sulfur, even when sealed.
![Mold Star™ 15 SLOW - 1A:1B By Volume Silicone Rubber](/pub/media/catalog/product//m/o/moldstar15-hero.png)
Videos
![](https://i.ytimg.com/vi/rDMXIGCVKzY/maxresdefault.jpg)
DIY Custom Valentine Candle Making Tutorial: Sculptex Clay & Mold Star Silicone
![](https://i.ytimg.com/vi/Bly-KDuZOgw/maxresdefault.jpg)
How To Make a Mold For Foam Cosplay Armor
![](https://i.ytimg.com/vi/8HyVCVfZ_g8/maxresdefault.jpg)
How To Make a Simple One Piece Silicone Mold - Pour On
![](https://i.ytimg.com/vi/FQ1A7ZjTsx8/maxresdefault.jpg)
How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial
![](https://i.ytimg.com/vi/N2yPHzspR90/maxresdefault.jpg)
Aquarium Decoration Tutorial: Casting a Clear Conch Shell in Crystal Clear Resin
In stock
SKU
moldstar15slow