Rebound™ 25
Shore 25A Self Thickening Brush-On Silicone
Rebound™ 25 is an easy-to-use addition-cure silicone rubber which self-thickens for making brush-on moulds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound™ rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
![Rebound™ 25 - Shore 25A Self Thickening Brush-On Silicone](https://www.benam.co.uk/pub/media/catalog/product/r/e/rebound-25-combo-533x400new.jpg?width=533&height=400&store=bam_view&image-type=image)
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
1A:1B
Mix Ratio By Weight
-
20 minutes
Pot Life
-
6 hours
Cure Time
-
25 A
Shore Hardness
Rebound™ 25 is soft, flexible and is good for making moulds of models with deep undercuts. Depending on model configuration, Rebound™ 25 can be inverted as a glove mould. Rebound™ 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound™ 25 and back it up with two coats of Rebound™ 40.
![Rebound™ 25 - Shore 25A Self Thickening Brush-On Silicone](/pub/media/catalog/product//r/e/rebound25.png)
Videos
![](https://i.ytimg.com/vi/QR1h9wUODz0/mqdefault.jpg)
How To Make a Silicone Mold for an Architectural Corbel Restoration - Moldmaking Demonstration
![](https://i.ytimg.com/vi/WhbjRbl_-y8/maxresdefault.jpg)
Cosplay Tutorial: Iron Man Helmet Silicone Mold
![](https://i.ytimg.com/vi/f1DnzIqIr4Q/mqdefault.jpg)
How To Make a Mold For a Thundercats Cosplay Prop Shield
![](https://i.ytimg.com/vi/ZCIO_2J1gF0/mqdefault.jpg)