Mold Star™ 15 SLOW

  • 1A:1B By Volume Silicone Rubber

Mold Star™ silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Moulds made with Mold Star™ will last a long time in your mould library and are good for casting wax, gypsum, resins, concrete and other materials.

Mold Star™  15 SLOW - 1A:1B By Volume Silicone Rubber

Quick Tech Data

  • 1A:1B

    Mix Ratio By Volume

  • 50 minutes

    Pot Life

  • 4 hours

    Cure Time

  • 15 A

    Shore Hardness

How Does It Work?
Watch 1-Minute Video

Cured Mold Star™ rubber is heat resistant up to 232°C (450°F) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star™ rubbers are not intended for brush-on mouldmaking.

Note: This product will not cure against surfaces containing sulfur, even when sealed.

Mold Star™  15 SLOW - 1A:1B By Volume Silicone Rubber

Videos

How To Make a Mold For Foam Cosplay Armor
How To Make a Simple One Piece Silicone Mold - Pour On
How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial
Aquarium Decoration Tutorial: Casting a Clear Conch Shell in Crystal Clear Resin

Available Sizes

  • Trial Kit
    £34.55
    *Vat Included
  • Net Wt: 0.91 kg
    QTY
  • Gallon Kit
    £225.74
    *Vat Included
  • Net Wt: 8.16 kg
    QTY

Product Questions

Total 1 question(s) page: 1

How can I eliminate bubbles from my castings?

Question submitted by: username | on: date time

Using a vacuum chamber or pressure pot will help in removing most to all bubbles from your castings. You can read more here.

Answer submitted by: username | on: date time

Have a Question?

  • Keep my question private