Rebound™ 25

Shore 25A Self Thickening Brush-On Silicone

Rebound™ 25 is an easy-to-use addition-cure silicone rubber which self-thickens for making brush-on moulds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound™ rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.

Rebound™ 25 - Shore 25A Self Thickening Brush-On Silicone
How Does It Work?
Watch 1-Minute Video

Quick Tech Data

  • 1A:1B

    Mix Ratio By Volume

  • 1A:1B

    Mix Ratio By Weight

  • 20 minutes

    Pot Life

  • 6 hours

    Cure Time

  • 25 A

    Shore Hardness

Rebound™ 25 is soft, flexible and is good for making moulds of models with deep undercuts. Depending on model configuration, Rebound™ 25 can be inverted as a glove mould. Rebound™ 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound™ 25 and back it up with two coats of Rebound™ 40.

Rebound™ 25 - Shore 25A Self Thickening Brush-On Silicone

Videos

How To Make a Silicone Mold for an Architectural Corbel Restoration - Moldmaking Demonstration
Cosplay Tutorial: Iron Man Helmet Silicone Mold
How To Make a Mold For a Thundercats Cosplay Prop Shield
Mold Making Tutorial: Making a Silicone Brush On Mold

Available Sizes

Rebound 25 - Trial Size

Net Wt: 0.91 kg

£37.69
*Vat Included

*Product Packaging May Vary

Rebound 25 - 1 Gallon Unit

Net Wt: 8.16 kg

£276.62
*Vat Included

*Product Packaging May Vary