Rebound™ 25
Shore 25A Self Thickening Brush-On Silicone
Rebound™ 25 is an easy-to-use addition-cure silicone rubber which self-thickens for making brush-on moulds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound™ rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
1A:1B
Mix Ratio By Weight
-
20 minutes
Pot Life
-
6 hours
Cure Time
-
25 A
Shore Hardness
Material Documents
Product Documents - Data Sheet / Health & SafetyRebound™ 25 is soft, flexible and is good for making moulds of models with deep undercuts. Depending on model configuration, Rebound™ 25 can be inverted as a glove mould. Rebound™ 40 is harder and less flexible. These products are compatible. For example, you can apply two coats of Rebound™ 25 and back it up with two coats of Rebound™ 40.
Videos
How To Make a Silicone Mold for an Architectural Corbel Restoration - Moldmaking Demonstration
Cosplay Tutorial: Iron Man Helmet Silicone Mold
How To Make a Mold For a Thundercats Cosplay Prop Shield
