TASK™ 18

  • Aluminum Filled urethane Casting Resin

TASK™ 18 is a relatively low viscosity aluminum filled urethane casting resin that was developed specifically for making short run vacuum forming moulds. When Parts A and B are mixed in proper proportion, TASK™ 18 cures overnight at room temperature with negligible shrinkage to a very hard plastic that has a very high compressive and flexural strength.

TASK™  18 - Aluminum Filled urethane Casting Resin

Quick Tech Data

  • 26A:100B

    Mix Ratio By Weight

  • 20 minutes

    Pot Life

  • 16 hours

    Cure Time

  • 88 D

    Shore Hardness

  • Metal Gray

    Colour

How Does It Work?
Watch 1-Minute Video
TASK™  18 - Aluminum Filled urethane Casting Resin

Cured TASK™ 18 can be polished, machined, drilled, painted, etc. TASK™ 18 is also used to make industrial production parts, prototype parts and tracing patterns.

Available Sizes

  • Trial Kit
    £32.99
    *Vat Included
  • Net Wt: 1.36 kg
    QTY
  • Gallon Kit
    £125.03
    *Vat Included
  • Net Wt: 5.49 kg
    QTY

Product Questions

Total 1 question(s) page: 1

How can I eliminate bubbles from my castings?

Question submitted by: username | on: date time

Using a vacuum chamber or pressure pot will help in removing most to all bubbles from your castings. You can read more here.

Answer submitted by: username | on: date time

Have a Question?

  • Keep my question private