Brush-On™ 35

  • Shore 35A "Brushable" Polyurethane Rubber Compound

Smooth-On’s Brush-On™ Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula.

Brush-On™ 35 - Shore 35A "Brushable" Polyurethane Rubber Compound

Quick Tech Data

  • 1A:1B

    Mix Ratio By Volume

  • 20 minutes

    Pot Life

  • 16 hours

    Cure Time

  • 35 A

    Shore Hardness

  • Grey-Green

    Colour

Brush-On™ 35 paints onto vertical surfaces without sagging and will cure with negligible shrinkage to durable rubbers that perform and last in production. Brush-On™ 35 will capture exact detail from any original model. Brush-On™ 35 is the softest of the series and offers the most flexibility and is used for models with deep undercuts. Brush-On™ 35 can be inverted and used to make glove molds.

Brush-On™ 35 - Shore 35A "Brushable" Polyurethane Rubber Compound

Videos

How To Make a Mold For Restoring a Concrete Architectural Seal

Available Sizes

  • Trial Kit
    £32.99
    *Vat Included
  • Net Wt: 0.86 kg
    QTY
  • Gallon Kit
    £126.31
    *Vat Included
  • Net Wt: 6.08 kg
    QTY

Product Questions

Total 1 question(s) page: 1

How can I eliminate bubbles from my castings?

Question submitted by: username | on: date time

Using a vacuum chamber or pressure pot will help in removing most to all bubbles from your castings. You can read more here.

Answer submitted by: username | on: date time

Have a Question?

  • Keep my question private